Salesforce

i5311 - Failure Loading Supply Error

« Go Back

Content

 
Article Number000015093
Titlei5311 - Failure Loading Supply Error
Body

Issue

 

The i5311 displays failure loading supply or load failure and will not feed labels. 

 

 

 

Cause

The labels are not positioned over the top of the media sensor like in the example below.

 

Troubleshooting

  1.  Ensure the leading edge of the media is resting on the black platen roller and the yellow media guides are positioned correctly on each side of the label liner. i5311 - How to Load Labels and Ribbon

  2.  Try another label or ribbon roll. 

  3. Check for any debris or adhesive residue that could be obstructing the labels from feeding through the printer, and clean the sensors in the printer. i5311 - Cleaning and Preventative Maintenance

 

  1. Try power cycling the printer.
     

If the issue persists, contact Brady Technical Support for your region and provide the serial number of the printer i5311 - How to Locate Serial Number, and the catalogue & lot numbers of the label and ribbon rolls: What Is The Label/Ribbon Part Number and Lot Number?

URL Namei5311---Failure-Loading-Supply-Error

Powered by