Purchase i7500 accessories on BradyID. The i7500 accessories may change so review BradyID for the current list of available accessories.
- Printhead - 300 or 600 dpi
- No calibration or firmware updates required.
- The printhead is field replaceable.
- Cutters
- Cutter Tray
- Tear Plate (Only available for standard configuration printer)
- Serrated edge that tears through the paper liner between the labels and through continuous labels.
- This is not recommended for thick stock liners, non-paper liners, or continuous non-paper liners.
- Cannot be used with the auto cutter.
- T-20 Wrench
- One comes with every printer but this can be purchased separately.
- I/O Port
- Used to transfer data to and from an external device.
- Platen Rollers
- Peel Model Only Accessories
- Label Taken Sensor
- When printing in peel mode, the sensor automatically triggers the next label print when the currently-presented label is removed
- Rewind Guide Plate
- Required when using peel configuration printer to internally rewind printed labels.
- Peel Plate
- Smooth-edge plate automatically peels qualified auto-dispensable labels from liner in peel mode, or can be used to tear thin paper liners for non-auto-peel printing.
- Tear Plate for i7500 Peel Configuration Printer
- Intended for using a Peel configuration printer in non-peel (tear-off) mode with thicker liner materials that don't tear off with the smooth-edge peel plate.
- 1.5" Internal Rewind Takeup Core
- Required when using peel configuration printer to internally rewind printed labels.
