Note: If the Wraptor is not printing after a job is sent from software, make sure the internal memory not set to use an external CF card. This setting is found in the Config tab on the Wraptor touch screen.
There are several ways in which files can be transferred to the Wraptor.
1. Using the LabelMark or Brady Workstation software.
a. Install the Wraptor Driver: How to Install the Wraptor Driver
b. Install Brady Workstation or LabelMark 6
c. Use this knowledge base for instructions to create label files in Brady Workstation or LabelMark 6.
2. Using the File Management Utility supplied on the Wraptor CD (obsolete). The file management utility is obsolete and has not been updated to ensure compatibility with the Windows 10 operating system.
3. Using the Codesoft software (a different label design software available for separate purchase), create a label file using the Wraptor print driver and a WRAP-xx part. Save the file then Print the file. This will transfer the file from the PC to the Wraptor.
4. Any Windows software using Wraptor's Windows print driver. Label/page sizes will need to be created in these software applications to design your labels and print accurately.
