Note: This information is provided for reference purposes only. Many of these printers models are obsolete and no longer serviced or supported.
Where can I get information about the printer's control codes for my Brady Thermal Transfer printer?
Review the ZPL Programming Guide, which contains programming information for the following Brady printers, which all speak ZPL code.
- 200M
- 260M
- 203X
- 203X-Plus
- 300X
- 300X-Plus
- 360X
- 360X-Plus
- 600X-Plus
- 200 MVP
- 300 MVP
- 200 MVP Plus
- 300 MVP Plus
- BBP11/12 (Native language is TSPL2, but interprets ZPL as well)*
- BBP33 (Native language is BPL, but interprets ZPL as well)*
- i4311
- i7100*
- i5100*
- i7500
*Printers that interpret ZPL are limited only to the most common ZPL commands. Refer to the Programming Guide for more information.
For the PDC Certis C1-30, i7500 and i4311, review the ZPL II Scripting Manual.
